This power supply for the 5-slot chassis, is CE-compliant. This supply uses the standard 3-pin connector (as shown), and requires a replacement cable when used with the original 5-slot chassis having the 8-pin power connector.

All our power supplies are shipped pinned for internal line frequency clock. If Sequence of Events (SOE) functionality is required on a NIM, the clock master, the clock slave, and the NIMs with SOE requirements must be pinned for use with external clocks. All other nodes are pinned for internal (line frequency) clock. The jumper is located on the printed circuit board directly behind the finger connector, and is clearly marked (EXT) and (INT).

WPC refurbishes LCN power supplies replacing electrolytic capacitors and verify output voltage specs.